Separate physical size from usable room
Choose a representative wide app, a reading window and a small utility. These reveal different constraints: the wide app may have a minimum size, the reading window needs useful line lengths, and the utility may be better left floating.
Transfer the difficult window first
In SlidePane, move the wide app from the larger screen to the smaller one using the display transfer command. Inspect the content before applying another preset. Can you still reach the important controls? Does the application refuse to shrink? If so, treat that as an app constraint rather than repeatedly requesting a narrower layout.
Try a floating rule for a tool that must retain its own size. For the reading window, select a comfortable width on the target display and navigate around it. The aim is usable content on both screens, not identical-looking frames.
Check the shared edge
Test a window near the boundary between the displays. macOS may restrict off-screen positioning near adjacent monitors, and SlidePane does not promise perfect clipping for every physical arrangement. Record the monitor order and the action that exposed the problem if you need to report it.
Finally, unplug the larger display after saving work. Verify that surviving windows are reachable on the remaining screen. Use display management guidance for transfers and the rules guide for exceptions. A profile should capture a useful task arrangement, while the actual connected screens still determine the available room.
Cite or share this page
Dapols. "Move between unequal monitors without losing readability." SlidePane, November 18, 2026. https://slidepane.com/en/blog/unequal-monitor-sizes
The link is stable. The citation uses the page's “Last updated” date.